The purpose of the TPMS on Your 2013 FIAT 500 is to warn You that one or more tires is under-inflated which could produce premature tire wear, tire failure, and unsafe driving conditions. To perform a reset of the TPMS only takes a few moments. First, turn the ignition to the "On/Run" position and then use the "Menu" button to select "Vehicle Information." Scroll to the "Tire Pressure" menu
Here is the description for the Oil Pressure Warning Light. "Oil Pressure Warning Light: This light indicates low engine oil pressure. The light should turn on momentarily when the engine is started. If the light turns on while driving, stop the vehicle and shut off the engine as soon as possible. A chime will sound for four minutes when this
How to reset #TPMS warning message in #Fiat 500 after changing wheels or tires. Passive tyre pressure monitor system will not detect new wheels on its own an
2020 500L Tire Pressures By Size. Fiat 500L models built in 2020 with the following tire sizes are recommended to be kept at the following pressures. Tire Size. Front. Rear. 205/55R16 91H. 35 PSI. 33 PSI. 225/45R17 91H.
If your 2015 Fiat 500 uses a direct system, resetting the tire pressure sensors may be as simple as pushing a reset button on the dash or following a menu as indicated in your owner's manual. If your 2015 Fiat 500 uses an indirect system, the system must be reset using a magnet or scanning tool by either a dealer or one you have bought yourself.
WJrir.